Soluable Seaweed Powder is a natural plant growth regulator made by alkaline hydrolysis of Norwegian seaweed, Ascophyllum nodosum . Plant growth regulators are materials which control the growth and developments of plants. These substances are present in small quantities, generally in range of parts per million (ppm) or even in parts per billion (ppb).The main growth regulators which promote plant growth are the auxins, hormones, indoles and cytokinins.
Cytokinins are cell division factors which were first discovered in rapidly dividing cells during the 1950’s. The indole compounds are naturally occurring plant growth promoters for root development and bud initiation. The greater proportion of scientific research products and crop response has been with Ascophyllum nodosum. This is largely because the supply of the product is stable and the processing of the seaweed biomass is subject to rigid quality control.
NPF™ is a natural plant nurtient and microbial rich solution that is derived from microbial composted liquid manure. NPF™ is higher in organic plant nutrients versus commerical fertilizer or raw manure which are inorganic. Organic plant nutrients are four to five times more effecient than inorganic for plant uptake and utilization. To be in the organic form, a carbon molecule complexed with nutrient is required.
Liquid Organic Fish Fertilizer is an all natural product that gives nutrients to the soil and helps build trace minerals.
Dry Organic Fish Fertilizer is made from cod fish amino acids protein 15-1-1.
Liquid ProKelp is intended to supplement and enhance a full fertilization program as recommended in accordance with reliable Soil and Tissue Analysis. Liquid ProKelp provides a source of immediately available nutrients but will not, by itself, provide all necessary nutrients required during the growing season.
DIRECTIONS FOR USE:
Liquid ProKelp is designed for foliar application and for injection through chemigation and sprinkler systems.
Apply the recommended amount of Liquid ProKelp in at least 8 gallons water per acre.
Soil At-Plant and Sidedress Application:
Liquid ProKelp can be mixed with macro and micronutrients applied early in the season as well as a sidedress application. Add 4 to 16 ounces of Liquid ProKelp with the fertilizers (UAN 32% solution, 10-34-0, 3-18-18 or phosphoric acid).
Seed Treatment Application: Liquid ProKelp can be added to the seed at the rate of 2 to 4 ounces per acre. Spray or mist the amount needed on the seeds. Aerate the seeds to dry after application. Make sure that the seeds are stored dry.
Foliar Application: Use Liquid ProKelp at the rate of 8 to 32 ounces in at least 25 gallons water per acre.
Corn: Foliar apply 8 to16 ounces per acre Liquid ProKelp with Corn Boost at V3 – V6 stage. Repeat at V9 if necessary.
Soybean: Foliar apply 8 to16 ounces per acre Liquid ProKelp with Bean Boost. Apply at V3 – V6. Repeat at R3 – R6.
Hay: Foliar apply 8 to16 ounces per acre Liquid ProKelp with Hay Boost. Apply as foliar 10 to14 days after first cutting and repeat after each cutting.
Grain Crops: Apply Liquid ProKelp at the rate of 8 to16 ounces per acre at tillering/before flag sheath stage.
Alfalfa: Apply 8 to16 ounces per acre before first cutting and after each cutting.
Fill the tank half full of water, add Liquid ProKelp and agitate to dissolve. Add dry formulations and dissolve, follow by liquids. Bring to volume with water. After thorough mixing, allow this mixture to stand for 5 minutes. If the combination remains mixed or can be readily remixed, it is physically compatible. Once compatibility has been proven, use the same procedure for adding products to the spray tank.
Liquid ProKelp is compatible with most fertilizers (including phosphates) and registered pesticides. However, compatibility jar test and small plot test is recommended before large-scale treatments are started. Always refer to products label.